{"product_id":"aim-tti-tgr6000-synthesized-signal-generator-tgr6000","title":"Aim-TTi TGR6000 Synthesized Signal Generator, 6 GHz, GPIB\/RS232\/LAN","description":"\u003ch3\u003eTGR6000 Synthesized Signal Generator\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10 MHz to 6000 MHz frequency range \u003c\/li\u003e\n  \u003cli\u003e10 Hz setability, ±1 ppm frequency stability \u003c\/li\u003e\n  \u003cli\u003eLocking to external frequency standard \u003c\/li\u003e\n  \u003cli\u003e-110 dBm to +7 dBm amplitude, 0.1 dB steps \u003c\/li\u003e\n  \u003cli\u003eFast stepping sweep with dwell times down to 10ms \u003c\/li\u003e\n  \u003cli\u003eList sweep of up to 1000 points of amplitude vs frequency \u003c\/li\u003e\n  \u003cli\u003eUser compensation tables for specific test set-ups \u003c\/li\u003e\n  \u003cli\u003eStorage for 12 generator set-ups and 16 sweep lists \u003c\/li\u003e\n  \u003cli\u003eCompact half-rack 2U casing uses minimum bench space \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe TGR6000 is a low-cost RF signal generator with a maximum frequency of 6GHz. It is intended for CW (carrier wave) applications where modulation is not required, and avoids the costs associated with adding modulations.\u003c\/p\u003e\n\u003cp\u003eLow phase noise is matched by low leakage, low residual FM and spurii. The internal timebase has a 1ppm stability, and an external frequency reference can be used for higher precision. \u003c\/p\u003e\n\u003cp\u003eThe output amplitude and\/or frequency can be swept over the full range of each in a single sweep. The instrument can be set up to perform two types of sweep. The first sweep type is a Step Sweep in which the start and stop conditions are defined, together with the number of points in the sweep, linear or logarithmic spacing between points, and a dwell time at each point. \u003c\/p\u003e\n\u003cp\u003eThe other sweep type is a List Sweep in which up to 1000 points are defined in a list, with the frequency, level and dwell time specified for each point. Both types of sweep can be free run or triggered by a Sweep Trigger from a variety of sources; in addition, a Point Trigger can be defined for each individual step of the sweep. A rear panel SYNC output signal indicates when the output is stable, and can be user-programmed to be high or low. \u003c\/p\u003e\n\u003cp\u003eThe output level can be adjusted to correct for external equipment frequency response using the TRIM function. The TRIM function consists of a user programmable list of up to 100 amplitude adjustment\/frequency pairs. \u003c\/p\u003e\n\u003cp\u003eThe instrument provides non-volatile storage for up to 12 instrument setups and up to 16 sweep lists. \u003c\/p\u003e\n\u003cp\u003eThe instrument is remotely controllable via LAN, USB, RS-232 or GPIB.\u003c\/p\u003e","brand":"Aim-TTi","offers":[{"title":"Default Title","offer_id":58410189521228,"sku":"22308.1","price":4184.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/2245\/6652\/files\/tgr6000-700_8d0508fa-93ad-4f99-ba98-7ff4dd2f01c3.jpg?v=1786719794","url":"https:\/\/www.testequity.co.uk\/products\/aim-tti-tgr6000-synthesized-signal-generator-tgr6000","provider":"TestEquity UK","version":"1.0","type":"link"}