{"product_id":"gw-instek-pel-2020b-dc-electronic-load-module-pel-2020b","title":"GW Instek PEL-2020B DC Electronic Load Module, Dual Channel, 80V, 20A, 100W, PEL-2000 Series","description":"\u003cul\u003e\n\u003cli\u003eMainframe required for operation \/ sold separately\n\u003c\/li\u003e\n\u003cli\u003eThis product is only a module\n\u003c\/li\u003e\n\u003cli\u003eDual channel DC load module\n\u003c\/li\u003e\n\u003cli\u003e0-80V, 0-20A, 100W (x2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMultiple independent load inputs up to 8 channels in a mainframe\u003c\/li\u003e\n  \u003cli\u003eSequence function to enable complex load simulations\u003c\/li\u003e\n  \u003cli\u003eFlexible configuration with mainframes and plug-in modules\u003c\/li\u003e\n  \u003cli\u003eParallel connection of inputs for increased load capacity\u003c\/li\u003e\n  \u003cli\u003eParallel connection of inputs for static and dynamic tests\u003c\/li\u003e\n  \u003cli\u003eMultiple channels run for dynamic tests under one clock control\u003c\/li\u003e\n  \u003cli\u003eMaximum rated power for low range high resolution CC tests\u003c\/li\u003e\n  \u003cli\u003eProgram mode to create work routines for repetitive tests\u003c\/li\u003e\n  \u003cli\u003eOPP\/OCP\/OVP\/OTP protections\u003c\/li\u003e\n  \u003cli\u003eExternal channel control\/monitoring via an analog control connector\u003c\/li\u003e\n  \u003cli\u003eUSB Device\/Host and RS-232C interface included\u003c\/li\u003e\n  \u003cli\u003eOptional GPIB\u003c\/li\u003e\n  \u003cli\u003eMulti-mainframe link up to 5 mainframes in a system\u003c\/li\u003e\n  \u003cli\u003ebackward-compatible with existing PEL-2000 products\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe PEL-2004 and PEL-2002 are multiple channel, programmable DC electronic loads with a modularized structure. \u003cbr\u003e\n  \u003cbr\u003e The PEL-2000 Series includes two types of mainframes and 4 types of load modules to accommodate users' requirements in a flexible manner. Any load module combination can be used with a mainframe to tailor a test system based on the number of channels, the maximum load power, voltage, and current of each channel. Multiple loads can be connected in parallel to provide a higher-power load. This flexibility significantly reduces the investment needed for future projects that have different power requirements. \u003cbr\u003e\n  \u003cbr\u003e The PEL-2004 is a 4-slot mainframe with a master control unit to hold 4 load modules, while PEL-2002 is a 2-slot mainframe with master control unit to hold 2 load modules. When the PEL-2004 is configured with 4 load modules rated at 350W each, the PEL-2002 is able to sink up to 1.4kW of power. \u003cbr\u003e\n  \u003cbr\u003e For higher load capacities, mainframes can be linked together in parallel with standard MIL 20-pin connectors. A maximum of 5 mainframes, including one master and 4 slaves can be chained together to create a total load capacity of 7kW for high current and high power applications. Using 4 dual channel load modules, the PEL-2004 is able to test 8 power supply outputs simultaneously. \u003cbr\u003e\n  \u003cbr\u003e The Sequence function allows each channel to change its load sink according to a predefined sequence at a rate of up to 100 s per step. Each sequence is able to run concurrently under the control of one clock. This is one of the most powerful features of the PEL-2000 Series as it is able to realistically simulate a multi-output power supply load. Under Dynamic mode, the load current or load resistance pulses between two preset levels at a pre-defined speed of up to 25 seconds per step. This is often used as the standard test procedure to verify the response of a power supply to quick load changes. Most remarkably, multiple load channels can be connected in parallel to run Dynamic tests synchronously under a single clock. This Parallel Dynamic functionality gives the flexibility to perform dynamic tests for a high-power power supply without the need of another high-power load.\n\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eIn The Box\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLoad module\u003c\/li\u003e\n\u003cli\u003eTest Lead GTL-120 x1\u003c\/li\u003e\n\u003cli\u003eSense Lead GTL-121 x1\u003c\/li\u003e\n\u003cli\u003eNote: mainframe sold separately and required for operation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GW Instek","offers":[{"title":"Default Title","offer_id":58409059516748,"sku":"45896.1","price":1575.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/2245\/6652\/files\/PEL-2020B_0123_078c7bbe-f282-460b-9879-c4a0f2dc1fce.jpg?v=1786718321","url":"https:\/\/www.testequity.co.uk\/products\/gw-instek-pel-2020b-dc-electronic-load-module-pel-2020b","provider":"TestEquity UK","version":"1.0","type":"link"}