{"product_id":"netally-lr10g-200-kit-linkrunner-10g-professional-kit-5-mappers-lr10g-200-kit","title":"NetAlly LR10G-200-KIT Linkrunner 10G Professional Kit: 5 Mappers, 2 Modules, Holster","description":"\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003e\u003cb\u003eNetAlly LR10G-200-KIT Linkrunner 10G Adv Ethernet Tester\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003e\u003cb\u003eFeatures And Specifications\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"UnorderedListStyle-sc-1koui9a koGePn\"\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eInstall, test, verify, and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purpose-built test hardware\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003ePhysical layer testing includes cable (TDR) testing, toning, wiremapping, and LANBERT Media Qualification testing with cable SNR (Signal-to-Noise Ratio) measurements for Multi-Gig links\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eCompatibility with standards compliant SFPs enables test and validation of any wired media (copper or fiber for a variety of use models\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eValidate up to 90W 802.3bt PSE with TruePower loaded Power over Ethernet (PoE) test\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eTwo LinkRunner 10G units can be used for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eAutoTest profiles with best practice pass\/fail thresholds for quick assessment\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eApproximately 8 GB available for storing test results and user applications, 1 GB packet capture buffer\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eSupports Micro SD card storage – up to 64GB supported\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003e5-inch color LCD sidplay with capacitive touchscreen (720 x 1280 pixels)\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eInterfaces RJ-45, Small Form-factor Pluggable (SFP), USB Type-A and Type-C\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eRechargeable lithium-ion battery pack, typical operating life is 3-4 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003e\u003cb\u003eLR10G-200 Linkrunner 10G Overview\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003eThe LinkRunner 10G is an economical choice for testing 10 Gig networks. It eases the process of testing and setting up copper and fiber Ethernet networks by integrating crucial installation and triage tasks into one robust device. Its advanced applications enhance workflow efficiency by extending the device's use beyond testing, enabling users to check trouble tickets, conduct speed tests, configure network devices, and perform other tasks with its smartphone-like features.\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003eAs a state-of-the-art tester based on Android, it provides comprehensive network validation, qualification, and troubleshooting. It covers everything from the medium (copper\/fiber) to the application (layers 1-7). This enhances the deployment speed, expedites the identification of issues, and boosts the productivity and efficacy of network installation and operations teams.\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003e\u003cb\u003eAutoTest\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003eAutoTest is the most comprehensive testing application on the LinkRunner 10G. It enables quick execution of various test types and stores their configurations and network credentials for future access. The app is fully customizable, offering test \"profiles\" for different network connections, VLANs, and individual \"test targets\" that can run with any profile.\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003e\u003cb\u003eMulti-Gig Link Validation\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003eThe Wired Link Test displays advertised and actual speed and duplex to diagnose mismatch issues. On links over 1G, each pair channel is graded based on the minimum SNR (signal-to-noise ratio) observed, to verify copper media for Multi-Gig capability (1 \/ 2.5 \/ 5 \/ 10Gig) and provide root cause diagnosis when link speed downshifting occurs.\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003e\u003cb\u003eVLAN Identification \u0026amp; Analysis\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003eThe LinkRunner 10G Wired AutoTest automatically identifies and lists VLANs supported by the connected switch port by analyzing the VLAN IDs of the traffic received. The LinkRunner 10G continues to display the distribution of traffic by VLAN until another wired AutoTest has executed, or the link to the switch port is severed.\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003e\u003cb\u003eSwitch Visibility\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003eThe LinkRunner 10G AutoTest automatically detects the nearest connected switch port by analyzing the xDP (CDP, LLDP, and EDP) protocols received. The LinkRunner 10G reports the content of the first xDP packet received as the nearest switch in the AutoTest result. It continues to monitor the xDP traffic received, and lists the source devices and the content of xDP traffic in the Switch Test detail.\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003e\u003cb\u003eCapture\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003eThe LinkRunner 10G can capture up to 10G line-rate to create a PCAP file of up to 1Gigabyte. Packet slicing and filtering are supported, and PCAP files can be uploaded to the Link-Live Cloud Service for easy sharing.\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003e\u003cb\u003ePerformance\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003eThe LinkRunner 10G Performance app provides point-to-point performance testing with a UDP traffic stream through its wired network interface against up to eight NetAlly hardware\/software endpoints. This test quantifies network performance in terms of target throughput rate, loss, latency, and jitter at a specified throughput.\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003eiPerf testing is available to test the network throughput for TCP\/UDP streams to an iPerf v3.0 server, such as the NetAlly Test Accessory.\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003e\u003cb\u003eLANBERT Media Qualification App\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003eThe LANBERT media qualification app for NetAlly’s multi-function professional instruments provides a simple and fast method of assessing the quality of transmission and available bandwidth in your copper and fiber cable plant. LANBERT generates and measures the transmission of line rate Ethernet frames over your network cabling infrastructure, qualifying its ability to support 1G\/10G on fiber and 100M\/1G\/2.5G\/5G\/10G on copper links. (Test requires two instruments, two EtherScope nXG units, two LinkRunner 10G units, or one of each)\u003c\/p\u003e\n\u003cp class=\"TypographyStyle-sc-11lquxl gYoVTJ\"\u003e\u003cb\u003eWhat's in the Box\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"UnorderedListStyle-sc-1koui9a koGePn\"\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eLR10G-200-KIT Linkrunner Ethernet Tester\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eOne year of AllyCare support (LR10G-200-1YS)\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eAC Charger (G3-PWRADAPTER)\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eEXG-LR10G-HOLSTER\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eSFP+ Optical Transceiver Module, multimode (SFP+MR-10G850)\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eSFP+ Optical Transceiver Module, singlemode (SFP+MR-10G1310)\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eRJ-45 inline coupler\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eWIREVIEW wire mapper #1-6\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eQuick Start Guide\u003c\/li\u003e\n\u003cli class=\"ListItemStyle-sc-1yqofwy gqiGZs\"\u003eMedium soft case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NetAlly","offers":[{"title":"Default Title","offer_id":58408390623564,"sku":"70049044","price":5884.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/2245\/6652\/files\/LR10G-100-KIT_01_0424.jpg?v=1786717135","url":"https:\/\/www.testequity.co.uk\/products\/netally-lr10g-200-kit-linkrunner-10g-professional-kit-5-mappers-lr10g-200-kit","provider":"TestEquity UK","version":"1.0","type":"link"}