Test Cables and Adapters

Search Within Category

: Stocked Items Only
Stocked Items Only
: Aim-TTi (1)
B&K Precision (8)
GW Instek (2)
Hioki (97)
Keithley (32)
Keysight (24)
Lascar Electronics (1)
Pico Technology (10)
Pomona (821)
Rohde & Schwarz (21)
Aim-TTi (1)
B&K Precision (8)
GW Instek (2)
Hioki (97)
Keithley (32)
Keysight (24)
Lascar Electronics (1)
Pico Technology (10)
Pomona (821)
Rohde & Schwarz (21)
SKS Hirschmann Test & Measurement (55)
Tektronix (6)
: AGF Series (3)
AGS Series (1)
AK Series (18)
AL Series (1)
AL-B Series (10)
B Series (5)
BNC Series (2)
FSH Series (2)
FieldFox Series (5)
GSP-Series (1)
1166 Series (3)
1325 Series (1)
1383 Series (1)
1581 Series (8)
1614A Series (2)
1658 Series (2)
1960 Series (2)
2138 Series (2)
2142 Series (8)
2249 Series (43)
2382 Series (2)
2397 Series (1)
2417 Series (1)
2428 Series (1)
2439 Series (1)
2451 Series (2)
2455 Series (1)
2600 Series (1)
2600-ALG Series (1)
2854 Series (3)
2948 Series (1)
2BC Series (1)
3258 Series (1)
3261 Series (1)
3430 Series (2)
3452 Series (2)
3533 Series (1)
3542 Series (6)
3548 Series (2)
3690 Series (1)
3750 Series (6)
3753 Series (1)
3760 Series (5)
3770 Series (2)
3777A Series (1)
3778 Series (1)
3780 Series (2)
3781 Series (52)
3782 Series (1)
3786 Series (1)
3788 Series (1)
3840 Series (1)
3843 Series (1)
3862 Series (1)
3925 Series (10)
4108 Series (2)
4119 Series (3)
4160 Series (1)
4233 Series (5)
4243 Series (2)
4276 Series (1)
4388 Series (1)
4391 Series (1)
4521 Series (1)
4531 Series (4)
4531-C Series (1)
4532 Series (2)
4555 Series (3)
4578 Series (1)
4613 Series (4)
4619 Series (1)
4723 Series (2)
4741 Series (2)
4773 Series (4)
4777 Series (2)
4788 Series (1)
4846 Series (5)
4899 Series (2)
4934 Series (2)
4935 Series (4)
4945 Series (5)
4964 Series (8)
4995 Series (2)
5000 Series (1)
5018 Series (6)
5054 Series (2)
5076 Series (1)
5090 Series (1)
5155 Series (2)
5156 Series (3)
5157 Series (1)
5173 Series (2)
5187 Series (7)
5223 Series (2)
5230 Series (2)
5250 Series (5)
5295 Series (2)
5301 Series (2)
5304 Series (2)
5360 Series (1)
5423 Series (1)
5682 Series (1)
5697 Series (10)
5699 Series (2)
5701 Series (2)
5749 Series (2)
5770 Series (2)
5790 Series (1)
5830 Series (3)
5955 Series (1)
6041B Series (1)
6244 Series (4)
6245 Series (2)
6248 Series (2)
6249 Series (6)
6383 Series (1)
6384 Series (1)
6510 Series (2)
6576 Series (4)
7078-TRX Series (4)
72902 Series (3)
72904 Series (2)
72905 Series (2)
72906 Series (2)
72907 Series (2)
72912 Series (2)
72919 Series (2)
72920 Series (4)
72921 Series (2)
72922 Series (1)
72923 Series (2)
72924 Series (2)
72925 Series (2)
72926 Series (2)
72927 Series (2)
72929 Series (2)
72930 Series (7)
73069 Series (4)
73071 Series (1)
73072 Series (2)
73075 Series (2)
73082 Series (5)
73083 Series (1)
73085 Series (3)
73086 Series (4)
73087 Series (10)
73088 Series (2)
73095 Series (2)
73096 Series (2)
73098 Series (3)
73099 Series (2)
73103 Series (2)
73104 Series (1)
73106 Series (3)
80 Series (1)
9140 Series (1)
AGF Series (3)
AGS Series (1)
AK Series (18)
AL Series (1)
AL-B Series (10)
B Series (5)
B2980A Series (1)
BNC Series (2)
CM3286 Series (1)
CM7290 Series (1)
CT7040 Series (7)
DM7275 Series (1)
FSH Series (2)
FieldFox Series (5)
GSP-Series (1)
HA Series (2)
HV-CA-554 Series (1)
IM series (1)
IM758X Series (1)
MA Series (31)
MG-B Series (4)
Micro-SMD Series (1)
NRP-Zxx Series (12)
P Series (8)
PanelPilot Series (1)
RT-Zxx Series (1)
U1200 Series (1)
U1700 Series (1)
ZV-Z Series (2)
: Adds a TDR display in CAT mode. Allows measurement of impedance changes along the cable length to identify specific cable faults. (5)
BNC-P to BNC-R (1)
For connecting BNC cable into triax fixture (1)
For single SMU channel (1)
Red/black set (1)
SMA-terminated cable, SMA to N type adapters, BNC to N type adapter. (1)
Set of two connectors that connect wires to all five input terminals. (1)
Set of two shorts which provide a convenient and reliable method to apply a short to the input connectors of the multimeter for calibration purposes. (1)
For measuring laminated sheet batteries. Cable length: 1.5 M (1)
For remote control and data logging to PC. Replaces U1173A. (1)
(1309.6117.00) (1)
(1321.1340.02) (1)
0.75m, M12(sensor side) - USB A (1419.0658.02) (1)
1.5m, connectors: M12 (sensor side) - USB A (1419.0658.03) (1)
2 Male BNCs, 1m (3.2 ft.) (1)
200 V, 1.5 m (1)
3 high capacity test leads with retractile sleeve plugs, 4/6mm spade lug adapters along with 4mm banana plug adapters, 3 extra-large alligator clips, 600 V CAT II and 36 Amps (1)
3-Lug, Female Triax to Male, guard disconnected (1)
3-Pin Connector to Unterminated Wires, 3m (1)
3-Slot Male Triax to Dual 3-Lug Female Triax Tee Adapter (1)
3-Slot Triax to Alligator Clips, 2m, Low Noise (1)
3-lug female triax bulkhead connector with cap (1)
3m (10 ft.) length 78-pin D-sub female to 78-pin D-sub male cable. (1)
4 pin terminal plug to 6 pin circular plug, 1.5 m (1)
400 MHz, passive, 100x, 50MOhm, 7.5pF, 1kVrms, 4kVtrans, 2m cable (1409.7720.02) (1)
5 meters (1146.6750.05) (1)
50 Ohm N(m)/N(m); DC to 18 GHz; 635mm (25 inch); 1 piece (1301.7572.25) (1)
50 Ohm; N(m) to 3.5mm(m); DC to 18GHz, flexible, phase stable; 910mm (36 inch) (1306.4513.36) (1)
50 Ohms (1)
5m, connectors:M12 (sensor side) - ODU 6-pole (1419.0664.04) (1)
Adapts the 5-pin male connector to a DB-9 connector. (1)
Adds a TDR display in CAT mode. Allows measurement of impedance changes along the cable length to identify specific cable faults. (5)
Allows you to charge the NI-MH rechargeable battery in the Keysight U1252B and U1253B handheld digital multimeter. The NI-MH battery is a standard shipped item for these digital multimeters. (1)
BNC-P to BNC-R (1)
Connects the 6517B interlock with the 8009 test fixture (1)
Converts the 4 Triax adapters on the rear panel to 5 banana jacks (1)
DB25 male to DB25 female, 5 ft (1)
DC to 8 GHz, armored, N male to N female connectors (1309.6600.00) (1)
DC to 8 GHz, armored, N male to N female connectors (1309.6617.00) (1)
Enables the U1700 Series Handheld Capacitor or LCR Meters and U1401A Handheld Multifunction Calibrator/Meter to be easily connected to a PC for fast transfer of data. Replaces U5481A. (1)
For connecting BNC cable into triax fixture (1)
For measuring laminated sheet batteries. Cable length: 1.5 M (1)
For remote control and data logging to PC. Replaces U1173A. (1)
For single SMU channel (1)
Provides a convenient and reliable short. It is included with the 34420A. (1)
Qty ONE 3-Slot male triax to BNC, guard removed (1)
Red/black set (1)
SMA-terminated cable, SMA to N type adapters, BNC to N type adapter. (1)
Set of two connectors that connect wires to all five input terminals. (1)
Set of two shorts which provide a convenient and reliable method to apply a short to the input connectors of the multimeter for calibration purposes. (1)
With Male Micro-DIN Connectors at each End, 1m (3.3 ft) (1)

Showing 9 of 1078 Results

Results Per Page

Sort by

content loaded

Part#	Brand	Product	Availability	Price	Quantity
MFG #PSA-CK Part #22832.1	Aim-TTi	Aim-TTi PSA-CK Cable and Connection Kit	Request Lead Time	£69.30(Excl. VAT)	Qty:
MFG #CC545 Part #21582.1	B&K Precision	B&K Precision CC545 Power Supply Accessory Kit	Request Lead Time	£112.20(Excl. VAT)	Qty:
MFG #TL 1 Part #44245.1	B&K Precision	B&K Precision TL 1 Sheathed Test Lead Set	Request Lead Time	£9.90(Excl. VAT)	Multiples of:5 Qty:
MFG #TL 9110 Part #44246.1	B&K Precision	B&K Precision TL 9110 DIY Banana Plug Kit, Solderless, Un-Sleeved	Request Lead Time	£10.73(Excl. VAT)	Multiples of:5 Qty:
MFG #TL8KC1 Part #33537.1	B&K Precision	B&K Precision TL8KC1 Shielded Kelvin Probe for Blade Input Handheld Meters	Request Lead Time	£60.23(Excl. VAT)	Qty:
MFG #TLBA1 Part #29688.1	B&K Precision	B&K Precision TLBA1 Terminal type test lead set	Request Lead Time	£79.20(Excl. VAT)	Qty:
MFG #TLBA2 Part #29689.1	B&K Precision	B&K Precision TLBA2 Tab type test lead set	Request Lead Time	£60.23(Excl. VAT)	Qty:
MFG #TLBA3 Part #29690.1	B&K Precision	B&K Precision TLBA3 Charger adapter test lead set	Request Lead Time	£22.28(Excl. VAT)	Qty:
MFG #TLC81 Part #45841.1	B&K Precision	B&K Precision TLC81 Self-Test Fixture, 5 Megohm Resistor, For BA8100 EIS Battery Analyzer	Request Lead Time	£140.26(Excl. VAT)	Qty: