Immunity Development System

• S21 optical sensor
• Transmission range DC...10 Mbps
• Optical fibre connector 2.2 mm Ø
• Supply voltage (3-5) V
• Current input 10 mA
• SGZ 21 burst Generator
• Pulse parameter
• Rise time ca. 2 ns
• Tail time ca. 10 ns
• Peak values ca. 0...1500 V
• Optical input
• Optical fiber 2.2 mm
• Max. frequency 5 MHz
• Min. pulse width 100 ns
• Supply voltage 12 V / 200 mA
• Sizes (L x W x H) (154 x 100 x 62) mm

The E1 is a set of EMC tools used for EMI suppression in printed circuit boards during the development phase. The developer can use the E1 set to quickly identify the causes of burst and ESD interference. This allows the developer to design suitable measures to solve the causes of the interference. It can also be used to test the effectiveness of the measures taken. The E1 test set-up is small and fits easily on a developer’s desk. The E1 set user manual describes EMC mechanisms and provides detailed descriptions of basic measuring strategies for interference suppression in printed circuit boards. The E1 set includes a generator to generate burst and ESD disturbances

In The Box

• 1x SGZ 21
• Burst Generator 1x S21
• Optical Sensor (10 Mbps) 1x BS 02
• Magnetic Field Source 1x BS 04DB
• Magnetic Field Source 1x BS 05D
• Magnetic Field Source 1x BS 05DU
• Magnetic Field Source 1x ES 00
• E-Field Source 1x ES 01
• E-Field Source 1x ES 02
• E-Field Source 1x ES 05D
• E-Field Source 1x ES 08D
• E-Field Source 1x MS 02
• Magnetic Field Probe 1x E1 acc
• Accessories 1x NT FRI EU
• Power Supply Unit 1x E1 case
• System Case 1x E1 m
• E1 Set User Manual