TestEquity UK
Fluke
Fluke

Fluke FLUKE-789 ProcessMeter, Compact DMM and mA Loop Calibrator Solution

Our Part #:15115.1

Condition:New

Mfr Part #:FLUKE-789

Fluke FLUKE-789
Fluke
Fluke

Fluke FLUKE-789 ProcessMeter, Compact DMM and mA Loop Calibrator Solution

Our Part #:15115.1

Condition:New

Mfr Part #:FLUKE-789

£1,815.60EACH(Incl. VAT)
£1,513.00EACH(Excl. VAT)

FLUKE-789 ProcessMeter

Features and Specifications

  • Fluke Connect-enabled with IR3000 FC Connector
  • DMM designed to meet 1000 volt IEC 1010 CAT III standards
  • Precision 1000 V, 440 mA True-rms digital multimeter
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode Test and Continuity Beeper
  • Simultaneous mA and % of scale readout
  • 20 mA dc current source / loop calibrator / simulator
  • Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp
  • 24 V Loop power supply
  • HART mode setting with loop power (adds 250 Ω resistor)
  • 1200 ohm drive capability on mA source
  • Enhanced backlight with two brightness settings
  • 0-100% mA Span Check buttons to toggle between 4 and 20 mA
  • Infrared I/O serial port compatible with FlukeView Forms Software
  • Externally accessible battery for easy battery changes
  • Externally accessible fuses for easy replacement

Double Your Troubleshooting Power

The Fluke 787 ProcessMeter was the first tool to combine a loop calibrator with a DMM to give process technicians double the power in one tool. Now it's even better, the range is extended with the new Fluke 789 - the ultimate loop calibration multimeter. The 789 has a display that's not only twice as large, but also twice as bright with two levels of backlighting. And with its built-in, selectable 250 ohm HART resistor, it eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.

It can measure, source, simulate 4-20 mA signals, measure resistance, measure power, provide power to the loop and provide 250-ohm resistance to the loop. The 789 includes SpanCheck; 0% and 100% buttons to toggle between 4 and 20 mA sourcing, while the display can simultaneously show mA and percentage of scale readings for faster troubleshooting. It also delivers 1200-ohm drive capability on mA source.

What's in the Box

  • Fluke 789 ProcessMeter
  • AC175 Alligator Clips
  • Four (4) AA 1.5 V alkaline batteries (installed)
  • TL71 safety-designed test lead set

Note: Fluke does not include a calibration certificate with these meters.


BrandFluke
Alternate Product Number1633984
True RMSYes
£1,815.60EACH(Incl. VAT)
£1,513.00EACH(Excl. VAT)