Mixed Signal Oscilloscope, 4 FlexChannels. Option: 4-BW-200 = 200MHz Bandwidth. Unit sold with a valid calibration certificate and 36 months manufacturer´s warranty. Input Channels: 4 FlexChannel Each FlexChannel offers one analog signal input or eight digital logic inputs with TLP058-logic probe (optional) Bandwidth: 200 MHz Sample rate (all analog/digital channels): Real time: 6,25 GS/s Interpolate: 500 GS/s Record length (all analog/digital channels): 31.25 Mio. points Standard 62.5 Mio. points (optional) Capture rate: >500.000 Signals/s Vertical resolution: 12 Bit ADC Up to 16 Bit in Hi-Res-Mode Standard trigger types: Edge, Pulse Width, Runt, Timeout, Window, Logic, Setup & Hold, Rise/ Fall Time, Parallel Bus, Sequence, Visual Trigger Auxiliary Trigger ≤300 VRMS (Edge Trigger only) Standard analysis: Cursor: Kurvenform, V-Balken, H-Balken, V&H-Balken 36 Measurements Plots: Time trend, histogram and spectrum Math: Arithmetic base signal calulation, FFT and advanced math-editor Search: search for any trigger criteria Jitter: TIE and Phase noise Optional Analysis: Spectrum view Mask testing Power Measurement and Analysis Optional triggering, decode and analysis serial busses: I2C, SPI, I3C,RS-232/422/485/UART, SPMI, CAN, CAN FD, LIN, FlexRay, SENT, USB 2.0, Ethernet, I2S, LJ, RJ, TDM, MIL-STD-1553, ARINC 429, Spacewire, 8B/10B Arbitrary function waveform generator: 50 MHz waveform generation Waveform types: Arbitrary, sine, square, pulse, ramp, triangle, DC-level, Gauß, Lorentz, Exponent. rise and fall, Sin(x)/x, white noise, Haversinus, cardiac Digital voltmeter: 4-digits voltage measurment the rms values of AC voltage, DC voltage as AC/DC voltage Trigger frequency counter: 8-digits Display: 13.3 (338 mm) TFT Color