• 3 GHz to 4 GHz, 294 mm, 202 mm, 76 mm
• Frequency range from 2 MHz to 3GHz/4GHz, upgrade via keycode
• DTF, return loss, VSWR and one-port cable loss measurements
• Large colour touchscreen
• Measurement wizard to speed up measurements and eliminate human errors
• Backlit keypad
• Fast boot time

The R&S Cable Rider ZPH is a one-port analyzer that has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Its unique features ensure fast and efficient cable and antenna measurements. The easy-to-use analyzer features a touchscreen and large keypad.

There is no need to calibrate the analyzer before use. It is reliably and accurately calibrated before leaving the factory. Should calibration be needed to eliminate the effects of additional cables or adapters used to connect the analyzer to the device under test (DUT), the R&S ZN-Z103 automatic calibration unit performs the calibration in just one step.

With its short boot and warm-up times and fast measurement speed, the R&S Cable Rider ZPH gets down to analyzing without much time loss. Measurement setups can be pre-drawn and settings preconfigured. Thanks to the wizard function, fast and accurate measurements are performed in a single step. Generating measurement reports is easy with the R&S Instrument View software.

The battery lasts an entire work day on just one charge. The keypad is illuminated to facilitate working in dim environments. The leading-edge capacitive touchscreen of the R&S Cable Rider ZPH is changing the way users interact with an analyzer - simply touch the screen to add markers and to change settings. These features and the ergonomic design make the R&S Cable Rider ZPH ideal for fast and efficient on-site measurements.

Two different R&S ZPH models are available to suit different needs, a pure one-port cable and antenna analyzer and a two-port model with additional spectrum analysis and tracking generator features.