Tektronix Encore Range

2-Channel Mixed Domain Oscilloscope 350MHz 2.5GS/s, 10M Record Length, 350MHz Spectrum Analyzer

The Tektronix MDO3032 is a Mixed-Domain-Oscilloscope of the MDO3000-series. It is a high integrated 6-in-1-Oscilloscope and contains an integrated spectrum analyzer, arbitrary function generator, logic analyzer, protocol analyzer as well as digital volt meter/counter (some optional). The MDO3000 is fully upgradable and customizable.

Features:

• TekVPI probe interface directly supports active, differential, and current probes for automatic scaling and units 9 in. WVGA wide screen color display
• Small footprint and lightweight - only 5.8 in. deep and 9.2 lb.
• FastAcq high-speed waveform capture rate finds elusive signal anomalies quickly
• Wave Inspector Controls provide easy navigation and automated search of waveform data 33 automated measurements and waveform histograms for simplified waveform analysis

Oscilloscope:

• Number of analog channels: 2
• Bandwidth: 350 MHz, upgradable up to 1 GHz
• Sample rate: 2,5 GS/s
• Record length on all channels: 10 M
• Max.waveform capture rate: >280,000 wfm/s
• Standard passive voltage probes with 3.9 pF capacitive loading and 1 GHz, 500 MHz, or 250 MHz analog bandwidth

Spectrum analyzer:

• Frequency range: 9 kHz - 350 MHz, optional: 9 kHz - 3 GHz
• Arbitrary function generator (optional): 13 predefined waveform types 50 MHz waveform generation 128 k arbitrary generator record length 250 MS/s arbitrary generator sample rate
• Logic analyzer (optional): 16 digital channels 10 M deep memory on all channels 121,2 ps time resolution
• Protocol analyzer (optional): Serial bus support for I2C, SPI, RS-232/422/485/UART, USB 2.0,CAN, LIN, FlexRay, MIL-STD-1553, and audio standards
• Digital voltmeter: 4-digit AC RMS, DC, and AC+DC RMS voltage measurements 5-digit frequency measurements
• Spectral analysis: Dedicated front-panel controls for commonly performed tasks
• Automated peak markers identify frequency and amplitude of spectrum peaks
• Manual markers enable non-peak measurements
• Trace types include: Normal, Average, Max Hold, and Min Hold Spectrogram display enables easy observation and insight into slowly changing RF phenomena
• Automated measurements include: Channel Power, Adjacent Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW)
• Arbitrary function generation: Generate predefined signals to quickly simulate missing devices in designs
• Capture signals on analog or digital inputs, transfer to the arbitrary edit memory, and replicate out from the AFG Add noise to any signal to easily perform margin testing
• Mixed signal design and analysis: Automated triggering, decode, and search on parallel buses
• Multichannel setup and hold triggering MagniVu high-speed acquisition provides 121.2 ps fine timing resolution on digital channels
• Protocol analysis: Trigger, decode and automatically search on packet-level content on most common embedded design serial bus standards
• Export protocol decode tables for use in documenting results
• Digital voltmeter and frequency counter: Quickly validate voltage or frequency measurements at a glance
• Graphical readout provides information on stability of the measurement
• Fully upgradable: Add functionality, increase bandwidth or spectrum analyzer frequency range
• Optional application support: Power analysis Limit and mask testing