Programmable Power Supply with 2 outputs 0-8V/5A, 0-20V/2.5A, 100W, GPIB and RS-232 Interfaces standard. Unit sold with 36 months manufacturer´s warranty. Reliable power supply for general purpose applications. These supplies combine convenient benchtop capabilities with flexible system features in a compact, multi-output package. For bench-only applications, two models are available without I/O interfaces. Address benchtop and ATE applications with up to three isolated dual-range outputs in a small package Utilize GPIB and RS-232 interfaces with SCPI command set (drivers available) Enhance signal integrity in test systems via low-noise outputs Simplify cabling with built-in measurements Streamline tasks with front panel control and basic programmable features Ensure DUT safety with overvoltage protection Programmable power supply Outputs: 2 Power: 100 W Output range: Range 1: 0 to 8 V / 5 A Range 2: 0 to 20 V / 2.5 A Programming Accuracy: Voltage: < 0.05 % + 10 mV (< 0.1 % + 25 mV for output 2 of E3646/47/48/49A) Current: < 0.2 % + 10 mA Ripple & Noise 20 Hz to 20 MHz: Normal Mode Voltage: < 5 mVpp / 0.5 mVrms Normal Mode Current: < 4 mArms Common Mode Current: <1.5 uArms Readback Accuracy: Voltage: < 0.05% + 5 mV (< 0.1% + 25 mV for output 2 of E3646/47/48/49A) Current: < 0.15% + 5 mA (< 0.15% + 10 mA for output 2 of E3646/47/48/49A) Auto-tracking feature Constant voltage (CV) Constqant current (CC) Overvoltage protection (OVP) In/out switch for output Remote sense, connector on rear panel Front and rear panel outputs RS232 and GPIB interfaces LabView, LabWindows and Agilent (now Keysight) VEE driver Memory for set ups: 5 Dimension (WxHxD): 213 x 133 x 348 mm Weight: 9,2 kg